Custom Band Sticker Vinyl Decal For Car Bumper Window Yeti Tumbler

Instructions: Placing a permanent vinyl sticker can be tricky. Please be slow, patient, and follow these instructions. For best results, make sure the placement for your sticker is clean, dry, and at room temperature. There are three pieces, the sticker, the backing, and the transfer tape. Start by carefully peeling off the backing at a 45 degree angle. If the backing won’t let go, place it face down on a flat surface/table, run across the whole thing on the back with a credit card Once the backing is removed, place the sticker in its desired location and press down on the design to ensure a good stick. (You can use the credit card here again if it is a flat surface). Slowly and carefully begin to peel away the transfer tape at a 45 degree angle, with a a gentle rocking back and forth motion. If the transfer tape doesn’t want to let go of the sticker, apply more pressure and try again. If your sticker has any bubbles, you can gently use a credit card to push them out, or low heat from a hair dryer.